Home » Service » Warranty » Warranty
Warranty
Search
Keyword
E-mail subscription

Warranty

2014-03-17 00:14:37 Click:
RULES OF WARRENTY PERIOD FOR
PLASTIC INJECTION MOLDING MACHINE
 
WELCOME TO USE “HAITAI” PLASTIC INJECTION MOLDING MACHINE,HERE UNDER IS THE RULES OF THE WARRENTY PERIOD:
1. THE STARTING DATE FOR PERIOD WILL BE CALCULATED FROM THE DATE THE MACHINE IS SHIPPED FROM HAITAI.
2. CUSTOMER CAN ENJOY THE FOLLOWING SERVICE DURING THE PERIOD ONLY UNDER THE CONDITION THAT THEY OPERATE HAITAI MACHINE CORRECTLY WITH RIGHT PLASTIC MATERIAL AND NORMAL OPERATION.
3. THE CATEGORY AND INSTRUCTION OF THE MAIN ITEMS (REFER TO THE FOLLOWING 1ST FORM AND 2ND FORM).

1ST FORM
 
ITEMS WARRENTY
PERIOD
ITEMS WARRENTY
PERIOD
ITEMS WARRENTY
PERIOD
CONTROLLER 12 MONTHS DIRECTIONAL VALVE
PUMPS(VICKERS/USA)
12 MONTHS PLATEN 24 MONTHS
CONTACTOR 6 MONTHS DIRECTIONAL VALVE PUMPS(SUNNY/USA) 18 MONTHS TIE BAR 24 MONTHS
HEATING
BAND
6 MONTHS HYD MOTOR 18 MONTHS OTHER
MECHANICAL
PARTS
12 MONTHS
OTHER
ELECTRICAL
ELEMENT
12 MONTHS OTHER HYDRAULIC
COMPONENT
12 MONTHS    
NOTE : FOLLWING POINTS ARE NOT INCLUDED DURING WARRANTY TERMS
1、 MACHINE IS DAMAGED BY INCORRECT OPERATION;
2、 THE PLATEN AND TIE BAR ARE DAMAGED DUE TO THE UNPARALLEL MOLD MOUNTED ON THE MACHINE OR NET&BOLT OF TIE BAR IS REMOVED WITHOUT AUTHORIZATION;
3、 THE CONTACTION AREA BETWEEN MOLD AND PLATEN IS LESS THAN SPECIFIED INSTRUCTION IN USER MANUAL OR IRREGULAR PRACTICES OF BOLT CAUSE THE PLATEN TO BE DAMAGED;
4、 THE HYDRAULIC PARTS GOT DAMAGED AFTER USING POOR QUALITY HYDRAULIC OIL;
5、 LACK OF LUBRICATION OR DAILY MAINTENANCE, DURING THE MACHINE RUNNING;
 
 
2ND FORM
RAW MATERIAL WARRENTY PERIOD FOR BARREL &SCREW
 
NITRIDING STAINLESS
STEEL
BIMETAL
GENERAL SPECIAL
NON-ENGINEERING PLASTIC
MATERIAL&PROCESSING WASTAGE
PP/PE
6 MONTHS 12 MONTHS 12 MONTHS 18 MONTHS
ENGINEERING PLASTIC (PURE
RETRACTION MATERAIL)
ABS、PC、PA、PMMA
6 MONTHS 12 MONTHS 12 MONTHS 18 MONTHS
ENGINEERING PLASTIC (PURE
RETRACTION MATERAIL)
PBT、PPS
4 MONTHS 6 MONTHS 5 MONTHS 12 MONTHS
15-30% FIBERGLAS OR LESS THAN 30%
CALCIUM CARBORATE IN THE PLASTIC
MATERIAL
3 MONTHS   5 MONTHS 12 MONTHS
30-40% FIBERGLAS OR LESS THAN 30%
CALCIUM CARBORATE IN THE PLASTIC
MATERIAL
2 MONTHS   3 MONTHS 10 MONTHS
FLAME RETARDANT OR CORROSINE
ADDITIVE THE PLASTIC MATERIAL
POM\PVC
3 MONTHS 10 MONTHS   18 MONTHS
NOTE :FOLLWING POINTS ARE NOT INCLUDED DURING WARRANTY TERMS
1、 THE HEATING TEMPERATURE HAS NOT ARRIVED PROPERLY WHEN OPERATING THE MACHINE OR THERE ARE METAL ADULTERANT IN THE PLASTIC MATERIAL WHICH MAKES SCREW DAMAGED;
2、 THE MACHINE RUNS DESULTORILY OR THE SCREW GOT EROSION WITHOUT IN TIME DISLODGING;
3、 THE SCREW TYPE IS NOT SUITABLE FOR THE RAW MATERIAL PROCESSING ON THE MACHINE DUE TO WRONG INFORMATION GIVEN WHILE IN PURCHASE.
 
SERVICE
FACTORY NO:    
DATE OF MANUFACTURING:    
 
DURING THE WARRENTY PERIOD,THE SELLER WILL PROVIDE THE BUYER CORRESPONDING
PARTS TO EXCHANGE THE DAMAGED PARTS FREE OF CHARGE UNDER THE CONDITION THAT THE
BUYER RUN THE MACHINE CORRECTLY. IF NECESSARY, THE SELLER WILL ALSO SEND ENGINEER
TO THE BUYER’S FACTORY TO SOLVE THE QUALITY PROBLEMS. EXPENSES OF ENGINEERS BE BORN
BY WHICH PARTY DEPEND ON THE ACTUAL SITUATION.