产品名称HTL1200
产品介绍
| 国际标准型号 | INTERNATIONAL CLASS | NO | HTW1200 | |||
| L款规格 | SPCIFICATION | CN | HTL1200 | |||
| A | B | C | D | |||
| 注射装置 | INJECTION UNIT | |||||
| 螺杆直径 | Screw diameter | mm | 110 | 115 | 120 | 125 |
| 螺杆长径比 | Screw L/D ratio | L/D | 23 | 22 | 21 | 20.2 |
| 理论注射容量 | Shot volume(theoretical) | cm3 | 5270 | 5760 | 6272 | 6805 |
| 注射重量 | Injection weight(ps) | g | 4796 | 5242 | 5707 | 6193 |
| 注射速率 | Injection rate | g/s | 793 | 867 | 944 | 1024 |
| 注射压力 | Injection pressure | Mpa | 186 | 170 | 150 | 144 |
| 螺杆转速 | Screw speed | rpm | 90 | |||
| 锁模装置 | CLAMPING UNIT | |||||
| 锁模力 | Clamping force | KN | 12000 | |||
| 移模行程 | Open stroke | mm | 1180 | |||
| 拉杆间距(宽×高) | Space between tie bars(W×H) | mm | 1220×1100 | |||
| 最大模厚 | Max.Mold height | mm | 1200 | |||
| 最小模厚 | Min.Mold height | mm | 450 | |||
| 顶出行程 | Ejector stroke | mm | 325 | |||
| 顶出力 | Ejector stroke | KN | 245 | |||
| 其他 | OTHERS | |||||
| 最大油泵压力 | Max.Pump pressure | Mpa | 16 | |||
| 最大马达功率 | Pump motor power | KW | 45+45 | |||
| 电热功率 | Heating power | KW | 66.1 | |||
| 外形尺寸(长×宽×高) | Machine dimension(L×W×H) | m | 12.54×2.66×3.27 | |||
| 油箱容积 | Olitank cubage | L | 2100 | |||
| 机器重量 | Machine weight | t | 60 | |||
