NameHTL90A
Introduction
| INTERNATIONAL CLASS | NO | HTW90 | ||
| SPCIFICATION | CN | HTL90A | ||
| A | B | C | ||
| INJECTION UNIT | ||||
| Screw diameter | mm | 30 | 32 | 35 |
| Screw L/D ratio | L/D | 23.5 | 22 | 20.1 |
| Shot volume(theoretical) | cm3 | 117 | 133 | 158 |
| Injection weight(ps) | g | 106 | 121 | 144 |
| Injection rate | g/s | 71 | 81 | 97 |
| Injection pressure | Mpa | 230 | 203 | 170 |
| Screw speed | rpm | 225 | ||
| CLAMPING UNIT | ||||
| Clamping force | KN | 900 | ||
| Open stroke | mm | 320 | ||
| Space between tie bars(W×H) | mm | 355×330 | ||
| Max.Mold height | mm | 350 | ||
| Min.Mold height | mm | 150 | ||
| Ejector stroke | mm | 90 | ||
| Ejector stroke | KN | 30 | ||
| OTHERS | ||||
| Max.Pump pressure | Mpa | 16 | ||
| Pump motor power | KW | 11 | ||
| Heating power | KW | 7.55 | ||
| Machine dimension(L×W×H) | m | 3.81×1.19×1.71 | ||
| Olitank cubage | L | 180 | ||
| Machine weight | t | 2.8 | ||
