NameHTL280A
Introduction
| INTERNATIONAL CLASS | NO | HTW280 | ||
| SPCIFICATION | CN | HTL280A | ||
| A | B | C | ||
| INJECTION UNIT | ||||
| Screw diameter | mm | 55 | 60 | 65 |
| Screw L/D ratio | L/D | 22.9 | 21 | 19.4 |
| Shot volume(theoretical) | cm3 | 676 | 805 | 945 |
| Injection weight(ps) | g | 615 | 732 | 859 |
| Injection rate | g/s | 223.5 | 266 | 312.2 |
| Injection pressure | Mpa | 202.3 | 170 | 144.9 |
| Screw speed | rpm | 220 | ||
| CLAMPING UNIT | ||||
| Clamping force | KN | 2800 | ||
| Open stroke | mm | 590 | ||
| Space between tie bars(W×H) | mm | 610×610 | ||
| Max.Mold height | mm | 630 | ||
| Min.Mold height | mm | 200 | ||
| Ejector stroke | mm | 150 | ||
| Ejector stroke | KN | 70 | ||
| OTHERS | ||||
| Max.Pump pressure | Mpa | 16 | ||
| Pump motor power | KW | 30 | ||
| Heating power | KW | 18.3 | ||
| Machine dimension(L×W×H) | m | 5.98×1.66×2.37 | ||
| Olitank cubage | L | 385 | ||
| Machine weight | t | 9 | ||
