NameHTX400
Introduction
INTERNATIONAL CLASS | NO | HTW400 | ||
SPCIFICATION | CN | HTX400 | ||
A | B | C | ||
INJECTION UNIT | ||||
Screw diameter | mm | 70 | 75 | 80 |
Screw L/D ratio | L/D | 23.6 | 22 | 20.6 |
Shot volume(theoretical) | cm3 | 1500 | 1723 | 1960 |
Injection weight(ps) | g | 1365 | 1567 | 1784 |
Injection rate | g/s | 335 | 384 | 437 |
Injection pressure | Mpa | 199 | 173 | 152 |
Screw speed | rpm | 150 | ||
CLAMPING UNIT | ||||
Clamping force | KN | 4000 | ||
Open stroke | mm | 720 | ||
Space between tie bars(W×H) | mm | 730×730 | ||
Max.Mold height | mm | 780 | ||
Min.Mold height | mm | 250 | ||
Ejector stroke | mm | 180 | ||
Ejector stroke | KN | 110 | ||
OTHERS | ||||
Max.Pump pressure | Mpa | 16 | ||
Pump motor power | KW | 37 | ||
Heating power | KW | 29.3 | ||
Machine dimension(L×W×H) | m | 7.52×1.9×2.5 | ||
Olitank cubage | L | 700 | ||
Machine weight | t | 16 |