NameHTL600B
Introduction
| INTERNATIONAL CLASS | NO | HTW600 | ||
| SPCIFICATION | CN | HTL600B | ||
| A | B | C | ||
| INJECTION UNIT | ||||
| Screw diameter | mm | 90 | 95 | 100 |
| Screw L/D ratio | L/D | 23.2 | 22 | 20.9 |
| Shot volume(theoretical) | cm3 | 2863 | 3190 | 3534 |
| Injection weight(ps) | g | 2605 | 2903 | 3216 |
| Injection rate | g/s | 575 | 640 | 710 |
| Injection pressure | Mpa | 177 | 159 | 143 |
| Screw speed | rpm | 150 | ||
| CLAMPING UNIT | ||||
| Clamping force | KN | 6000 | ||
| Open stroke | mm | 870 | ||
| Space between tie bars(W×H) | mm | 870×870 | ||
| Max.Mold height | mm | 900 | ||
| Min.Mold height | mm | 350 | ||
| Ejector stroke | mm | 250 | ||
| Ejector stroke | KN | 150 | ||
| OTHERS | ||||
| Max.Pump pressure | Mpa | 16 | ||
| Pump motor power | KW | 30+37 | ||
| Heating power | KW | 42.95 | ||
| Machine dimension(L×W×H) | m | 10.2×2.24×2.71 | ||
| Olitank cubage | L | 1100 | ||
| Machine weight | t | 28 | ||
